Need help?Do you have a question about the Hoshizaki KM-151BAH and is the answer not in the manual?
Details specifications for the KM-61BAH model.
Details specifications for the KM-101BAH model.
Diagrams and descriptions of the icemaker's physical components.
Explains the step-by-step process of icemaking cycles.
Details the control board layout, features, and diagnostics.
Describes the harvest control system and thermistor operation.
Diagrams illustrating the water and refrigerant flow paths.
Schematic diagrams for electrical connections of various models.
Illustrates the timing and operation of components during cycles.
Provides performance metrics like ice production and cycle times.
A systematic check for diagnosing electrical and component failures.
Identifies causes and remedies for the unit not producing ice.
Diagnoses and resolves issues related to a frozen evaporator.
Addresses causes and solutions for reduced ice output.
Information and procedures for servicing refrigerant lines safely.
Step-by-step guide for replacing the compressor unit.
Procedure for removing and installing a new refrigerant drier.
Instructions for replacing the hot gas valve.
Procedure to replace the float switch on KM-151 models.
Steps for replacing the power switch.
Procedure for replacing the fuse and fuse holder.
Instructions for removing and installing the control board.
Detailed steps for cleaning the icemaker.
Instructions for sanitizing the icemaker components.
Guidance on cleaning and maintaining the exterior panels.
Procedures for cleaning the storage bin and scoop.
To Next Page
General