Need help?Do you have a question about the Hoshizaki KMD-860MAJ and is the answer not in the manual?
General| Condenser Type | Air-cooled |
|---|---|
| Refrigerant | R-404A |
| Type | Modular Ice Maker |
| Ice Production Capacity | 860 lbs/24h |
| Ice Type | Crescent |
| Power Supply | 208-230/60/1 |
| Storage Capacity | Not applicable |
Indicates a hazardous situation which could result in death or serious injury.
Indicates a situation which could result in damage to the appliance or property.
Indicates important information about the installation, use, and care of the appliance.
Details electrical and refrigerant specifications for the models.
Provides side view diagram and measurements for MAJ models.
Shows rear view, electrical, and water connection points for MAJ models.
Illustrates the bottom view and storage bin opening for MAJ models.
Provides side view diagram and measurements for MWJ models.
Shows rear view, electrical, and water connection points for MWJ models.
Illustrates the bottom view and storage bin opening for MWJ models.
Provides side view diagram and measurements for MRJ models.
Shows rear view, electrical, and connection points for MRJ models.
Illustrates the bottom view and storage bin opening for MRJ models.
Provides top view diagram and measurements for URC-9F.
Shows rear view and electrical supply opening for URC-9F.
Specifies ideal placement and environmental conditions for the icemaker.
Outlines essential checks before proceeding with appliance installation.
Step-by-step guide on how to safely remove unit panels.
Instructions for positioning, leveling, and securing the icemaker.
Details necessary electrical connections and safety compliance.
Guidelines for connecting water supply and drain lines.
Instructions for installing the remote condenser unit.
A comprehensive checklist to ensure proper installation.
Steps to follow for initial startup and operation.
Specifies the water supply inlet type and minimum line size.
Specifies the drain outlet type and minimum line size.
Details the condensation drain outlet type.
Specifies condenser water inlet type and minimum line size.
Specifies condenser drain outlet type and minimum line size.
Specifies condenser water inlet type and minimum line size for closed loop.
Specifies condenser return outlet type and minimum line size for closed loop.
Guidelines for choosing a suitable permanent site for the unit.
Specifies required clearances for air circulation and service.
Verifies shipping carton, tape, and refrigerant lines.
Instructions for assembling legs and securing the unit.
Details line set sizing and refrigerant charge adjustments.
Procedure for installing pre-charged factory line sets.
Guidelines for fabricating and installing custom line sets.
Instructions for grounding and connecting wires for remote units.
Details on connecting the power supply to the unit.
Steps to install the first remote condenser unit.
How to place and secure an additional unit on top.
Checks for icemaker level and environmental conditions.
Verifies proper clearances and removal of packaging materials.
Confirms correct electrical and water hookups and codes.
Checks compressor mounting and refrigerant line routing.
Special checks for remote condenser unit installations.
Ensures user is informed and warranty is registered.
Sequence for powering on and setting the control switch.
Verifying bin control and condenser temperature.
Critical safety warnings for performing maintenance on the appliance.
Recommended schedule for routine maintenance tasks.
Detailed instructions for cleaning and sanitizing the icemaker.
Steps before starting the cleaning process.
Step-by-step guide for cleaning the icemaker components.
Instructions for rinsing after the cleaning cycle.
Detailed procedure for sanitizing the icemaker with bleach solution.
First rinse cycle after sanitizing.
Second rinse cycle after sanitizing.
Third rinse cycle after sanitizing.
Procedure to remove water from the supply line for storage.
Steps to drain the water tank for extended periods or freezing temps.
Instructions to drain water from the water-cooled condenser.
Guidelines for proper disposal of refrigerant and the unit.
To Next Page
