EasyManua.ls Logo

Hot Max HM2000 - Grounding the Generator; Spark Arresting Muffler

Default Icon
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
KDAR Company 6
4. Never use stale or contaminated gasoline or
oil/gasoline mixture. KDAR recommends a
fuel stabilizer.
5. Avoid getting dirt or water in the fuel tank.
Set Up
Grounding the Generator
KDAR recommends generators be properly con-
nected to an appropriate earth ground to help pre-
vent electric shock. The ground terminal found on
the control panel is connected to the frame of the
generator for this purpose. Connecting a length of
heavy gauge (6 AWG minimum) copper wire be-
tween the generator and a copper rod driven into
the ground should provide an acceptable ground
connection. Please contact a local qualified electri-
cian to insure local codes are being followed.
Spark Arresting Muffler
All Hot Max generators are equipped with spark
arresting mufflers allowing for use around agricul-
tural crops, forests, brush, grass and other similar
items. Spark arresting mufflers are required in the
State of California and on some U.S. Forest Ser-
vice Land and may also be legally required under
other statutes and ordinances. The California stat-
ues requiring a spark arresting muffler are Sections
13005(b), 4442 and 4443.

Related product manuals