Hot Max PW20 - Shutting Down the Pump

KDAR Company 10
Operation
Shutting Down the Pump
Note: For emergency engine stop, simply turn
the engine switch to OFF.
1. Move the throttle lever to the SLOW position.
2. Turn the engine switch to the OFF position.
3. Turn fuel valve to the off position.
Note: When the pump is not in use the fuel
valve should be in the OFF position.
4. Remove the pump drain plug and drain the
pump chamber.
5. Remove filler cap from the pump and flush
the pump chamber with clean water.
6. Allow water to drain from the pump chamber
and replace filler cap and drain plug.
SLOW
Filler
Cap
Drain
Plug