Hotone NANO LEGACY Series User Manual

Owner’s Manual
THANK YOU FOR PURCHASING A HOTONE PRODUCT!
www.hotoneaudio.com
Series
Amplifier Head
※ In the interest of product improvement, the specifications and/or the content of
products (including but not limited to appearances, packaging design, manual content,
accessories, size, parameters and display screen), are subject to change without prior
notice. Please check with local supplier for exact offers. Specifications and features
(including but not limited to appearances, colors and size) may vary by model owing to
environmental factors, and all images are illustrative.

Hotone NANO LEGACY Series Specifications

General

Input	1/4" instrument input
Output	1/4" speaker output
Technology	Solid State
Controls	Gain, Volume, Tone
Power Supply	9V DC
Type	Guitar Amplifier
Channels	1
Effects	Built-in Reverb
Outputs	Speaker Output, Headphone Output
Power Supply Adapter	9V DC
Aux Input	1/8" Aux Input

Summary

Front Panel Controls

Input Jack

1/4" mono jack to plug in your guitar.

Gain Control

Controls the gain level of the amplifier.

Bass Control

Controls the low frequency response.

Middle Control

Controls the mid frequency response.

Treble Control

Controls the high frequency response.

Volume Control

Controls the output volume of the amplifier.

Rear Panel Connections

18V DC Power Input

Port for plugging in the 18V DC adapter (center negative).

Phones/Line Output

1/8" stereo jack for headphones or recording.

Auxiliary Input

1/8" stereo jack for connecting an external music player.

FX Loop Send

1/4" mono jack for connecting to effects input jack.

FX Loop Return

1/4" mono jack for connecting to effects output jack.

Speaker Output

1/4" mono jack for connecting to your cabinet (4-16 Ω).

Product Features

Product Specifications