Hotpoint Ariston FMSD 822 User Manual

GB
1
Contents
Installation, 2-3
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 4
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and tips, 5
General safety
Disposal
Description of the washing machine, 6-7
Control panel
Display
Running a wash cycle, 8
Wash cycles and functions, 9
Table of wash cycles
Wash functions
Detergents and laundry, 10
Detergent dispenser drawer
Preparing the laundry
Special wash cycles
Load balancing system
Troubleshooting, 11
Service, 12
FMSD 822
Instructions for use
WASHING MACHINE
English,1
GB
Česky,13
CZ
SK
Slovensky,25

Hotpoint Ariston FMSD 822 Specifications

General

Brand	Hotpoint Ariston
Model	FMSD 822
Category	Washer
Language	English

Summary

Washing Machine Installation Guide

Unpacking and Levelling Procedures

Instructions for removing packaging and ensuring the machine is stable.

Connecting Water and Electricity Supplies

Guidance on connecting the appliance to power and water sources.

Drain Hose and Electrical Connections

Care and Maintenance Instructions

Safely Cutting Off Supplies

Cleaning the Washing Machine

Safety Precautions and Disposal

General Safety Guidelines

Important safety instructions for using the washing machine.

Washing Machine Description

Control Panel Overview

Display Information

Running a Wash Cycle

Starting and Customizing the Wash

Troubleshooting Common Issues

Machine Not Starting or Filling

Troubleshooting steps for when the machine won't start or fill.

Water Intake and Drainage Problems

Solutions for problems with continuous water filling and draining.

Drainage, Spin, and Vibration Issues

Guidance for issues related to draining, spinning, and excessive vibration.

Leaks, Error Codes, and Foam

Troubleshooting for leaks, error codes, and excessive foam issues.