To Next PageTo Next PageWhat to do if Hotpoint Ariston Dishwasher won't start?
If your dishwasher isn't starting, here are a few things to check: * Make sure the water supply tap is turned on. * Try switching the appliance off and on again after a minute, then reset the wash cycle. * Ensure the appliance is properly plugged in, and try a different socket. * Verify that the dishwasher door is fully closed.
What to do if Hotpoint Ariston LTF 11M116 Dishwasher won't drain water?
If water isn't draining from your dishwasher, consider these possibilities: * The wash cycle might not be complete. * The drain hose could be bent. * The drain duct might be clogged. * The filter may be clogged with food residues. * The height of the drain hose should be checked.
What to do if Hotpoint Ariston LTF 11M116 won’t load water?
If your dishwasher isn't loading water and has flashing lights, check the following: * Ensure there is water in the mains supply and the tap is open. * Check if the water inlet hose is bent. * Clean any clogged filters. * Clean any clogs in the drain duct. After checking and cleaning, try switching the dishwasher on and off and starting a new wash cycle. If the problem continues, turn off the water tap, remove the plug, and call the Service Centre.
What to do if the Hotpoint Ariston LTF 11M116 Dishwasher door won’t close?
If the dishwasher door isn't closing, make sure the racks are fully inserted. Also, ensure the lock is released and push the door firmly until you hear a 'clacking' noise.
Why is my Hotpoint Ariston Dishwasher not cleaning dishes properly?
If your dishes aren't coming out clean, several factors could be at play: * The dishes may not be arranged properly. * The spray arms might be blocked by the dishes, preventing them from rotating freely. * The selected wash cycle may not be strong enough. * Too much foam could be present due to incorrect detergent dosage or unsuitable detergent. * The rinse aid compartment lid may not be closed correctly. * The filter might be dirty or clogged. * The refined salt level could be low. * The height of the dishes might not be compatible with the rack adjustment. * The holes in the sprayer arms might be clogged.
Why does my Hotpoint Ariston Dishwasher make excessive noise?
Excessive noise from your dishwasher can be attributed to a couple of things: * Dishes rattling against each other or the spray arms: Ensure dishes are placed properly, allowing the spray arms to rotate freely. * Too much foam: This could be due to incorrect detergent measurement or using a detergent not suitable for dishwashers. Avoid pre-washing dishes by hand.
Why are there white film or limescale deposits on my Hotpoint Ariston Dishwasher dishes?
A white film or limescale on your dishes could be due to: * Lack of refined salt. * Incorrect water hardness adjustment: Increase the values accordingly. * Salt and rinse-aid dispenser cap not properly closed. * Rinse aid being used up or the dosage being too low.
Why is my Hotpoint Ariston LTF 11M116 Dishwasher crockery not drying properly?
If your crockery isn't drying well, here are some possible reasons: * A wash cycle without a drying programme might have been selected. * The rinse aid may have been used up. * The rinse aid dispenser setting might not be suitable. * The crockery could be made from non-stick material or plastic, in which case water drops are normal.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Built-in display | Yes |
| Noise Level | 46 dB |
| Water Consumption per cycle | 11 L |
| Number of Washing Programs | 11 |
| Drying Class | A |
| Cycle time | 190 min |
| Delay Start | Yes |
| Delay Start (max) | 24 h |
| AquaStop function | Yes |
| Connected load | 1900 W |
| Inlet hose length | 1.55 m |
| Outlet hose length | 1.5 m |
| Annual Water Consumption | 3080 L |
| Half Load Option | Yes |
| Product size | 60 cm |
| Number of Place Settings | 11 |
| Energy Efficiency Class | A |
| Washing programs | Eco, Intensive, Normal |
| Dimensions (H x W x D) | 850 x 600 x 600 mm |
Connects the water inlet and outlet hoses to the appliance, ensuring proper water flow and preventing leaks during installation.
Details how to connect the dishwasher's outlet hose to a sink drain or waste pipe at the correct height.
Explains the safety features designed to prevent water leaks and flooding.
Outlines the necessary steps and safety precautions for connecting the dishwasher to the mains electrical supply.
Provides instructions for placing the dishwasher on a stable, level surface for optimal operation.
Instructions for cleaning the spray arms and the filter assembly for optimal performance.
Solutions for problems related to the dishwasher not turning on or being unresponsive.
Troubleshooting steps for issues with the door not closing or water not draining.
Addresses excessive noise, white film, and streaking on dishes.
