To Next PageTo Next Page
Need help?Do you have a question about the Hotpoint AQUALTIS AQC9 BF5 and is the answer not in the manual?
General| Appliance placement | Freestanding |
|---|---|
| Rated capacity | 9 kg |
| Drying class | A |
| Energy efficiency class | A++ |
| Color | White |
| Drum Material | Stainless steel |
| Delay Start | Yes |
| Child Lock | Yes |
| Type | Condenser |
| Loading type | Front load |
| Width | 595 mm |
| Height | 85 cm |
| Dimensions (H x W x D) | 850 x 595 x 630 mm |
| Depth | 630 mm |
Instructions for cleaning the fluff filter after every drying cycle to ensure optimal performance.
Procedure for emptying the water container after each drying cycle to prevent machine stoppage.
Guidelines for positioning the dryer, including spacing requirements for air circulation.
Importance of adequate ventilation for dryer operation and avoiding condensation.
Instructions for connecting the dryer to a drain, including tube length and positioning requirements.
Safety checks and procedures for connecting the dryer to the electrical socket.
Explanation of the dryer's control panel, buttons, lights, and programme knob.
Details the three sections of the display panel and their functions.
Step-by-step guide on how to select and start a drying programme.
Introduction to special programmes like Easy Iron, Wool, and Jeans.
Explanation of how Sensor Drying works and its available options.
Explanation of how Timed Drying works and its available options.
Explains the indicator light for the water container and filter status.
Guidance on sorting clothes by fabric type and preparing them for drying.
Explanation of common tumble dry symbols found on garment labels.
List of items that should not be tumble dried and why.
Essential safety rules for operating the tumble dryer to prevent injury and damage.
Advice on how to save energy and respect the environment while using the dryer.
Detailed steps for cleaning the fluff filter after each cycle.
Reminder to empty the water container after each cycle.
Procedure for periodic cleaning of the condenser unit.
Common causes and solutions when the dryer fails to start.
Reasons why the drying cycle might not start and how to resolve them.
Factors causing slow drying and solutions to improve performance.
Explanation for the empty water light flashing after a short run time.
Meaning of the empty water light being on without flashing.
Reasons for clothes being damper than expected and solutions.
What to do when the display shows fault codes F10, F15, or other numbers.
Key contact numbers and website for Hotpoint service and support.
