Storage Drawers (continued)
Convertible Meat Keeper
(on models so equipped)
The Convertible Meat Pan drawer
has its own cold air duct to allow a
stream of cold air from the freezer
compartment to flow around the
drawer.
The variable temperature control
regulates the air flow from the
freezer compartment.
CSX22
CSX20
Set control lever all the way down–
the coldest setting–to store fresh
meats. If lever is left in meat position
for a long period of time, some frost
may form on the inside of the drawer.
Set control lever all the way up to
convert the drawer to normal refrig-
erator temperature and provide
extra vegetable storage space.
Cold air duct is turned off.
Variable settings between these
extremes can be selected.
To Remove Drawers
To Remove Sealed & Fresh
@
Drawers will stop before coming
or Fruits &Vegetables
all the way out of refrigerator to
Drawer and Cover
help prevent contents from spilling
fModel CSX201
onto floor. Drawers can easily be ‘
.
1. Pull drawer part-way out. Reach
removed by tilting up slightly and
pulling past “stop” location.
in, push rear of glass cover up and,
at the same time, push it back until
To remove drawers when the fresh
it clears front-corner retainers.
food compartment door cannot be
opened fully:
Remove food from the drawer and
its cover. If your refrigerator has
adjustable (cantilever) shelves,
remove food from the bottom shelf . .
and temporarily relocate it higher
up in cabinet. Then follow the pro-
cedure at right that is applicable
to your model.
2. Tilt and remove the cover.
3. Tilt and remove the drawer.
To Remove Convertible
Meat Pan Drawer
(on models so equipped)
1.
Grasp rear of flexible meat pan
cover, bend
it upward
and push it I
I
right of
cover lines
on cover
support.
and take
it out.
drawer.
l—
cleaning,
reverse procedure to replace.
8
.. ----
To Next Page
Loading...
