EasyManua.ls Logo

Hotpoint DLB2450B - Page 12

Hotpoint DLB2450B
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The Problem
Solver
(continued)
PROBLEM
POSSIBLE CAUSE AND REMEDY
WWNKLING
IN
Accumulation of lime scale due to use of carbonate detergents. If you must use a
PERMANENT
PWSS
non-phosphate detergent, avoid the use of a high-carbonate detergent.
AND “NO-IRON”
ITEMS (continued)
Faiiure
to use fabric softener. Proper use of fabric softener will minimize
wrinHing.
To remove
wrinkles:
Retumble
on Permanent Press (Medium) selection.
@
Rerinse
and dry on Permanent Press (Medium) selection.
If unsuccessful,
retumble
on high heat for 10-12 minutes and hang immediately.
Iron carefully.
Send to dry cleaners for pressing.
. Some
wrirddes
may remain which cannot be removed:
*N~E:
If you
follow
good laundry procedures and Permanent
press
clothes
still
come
out
wrirdded,
the finish may not be good quality. Also, in permanent press synthetic/
cotton blends, the cotton portion of the fabric can eventually wear away leaving only the
synthetic. Since it’s the cotton portion which is treated for Permanent Press, a loss or
decrease of Permanent Press performance will result.
12

Related product manuals