EasyManua.ls Logo

Hotpoint EG74 - Page 21

Hotpoint EG74
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PROBLEM
Before contacting your Service Centre or Installer, check the problem guide
below, there may be nothing wrong with your cooker.
CHECK
Burner will not light:
Burner ports Ignitor
Hotplate burner
If all burners fail to ignite:
Check that sparks appear at the burners; a
clicking noise should be heard.
If not;
Check that the electricity supply is turned on.
If the electricity supply has failed, the hotplate
burners can be lit by a match.
If only one burner f
ails to ignite:
Check that the burner is dry and that spillage of
food or cleaning fluid remains are not affecting
the ignitor or burner ports.
Clean away any debris with a dry nylon brush such
as an old toothbrush. If a wire wool pad has been
used for cleaning around the burner ensure the
ignitor is free from any stray strands. Any water
on the burner should be dried with a cloth or
kitchen towel.
Make sure that all the burner parts are correctly
seated.
21
Something Wrong with your Cooker

Related product manuals