www.Hotpoint.com
. PROPERINSTALLATION
_b This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
If you did not receive an Installation Instructions, you can receive one by visiting GEAppliances.com or by calling
800.GE.CARES(800.432.2737).
Ensurethat the hot water hose is connected to the "H"
(internal red screened)valve and the cold water hose is
connected to the "C"(internal blue screened)valve.
Installor store where itwill not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate
the warranty.
Properlyground washer to conform with all
governing codes and ordinances. Followdetails
in Installation Instructions.
Toensure proper installation, run two small load size
Whites/Quick Wash cycles BEFOREwashing the first
load.
[] Thiswasher does not include water supply hoses.
GEstrongly recommends the use of factory specified
parts. A list of factory hosesavailable for purchase are
listed below. Thesehoses are manufactured and tested
to meet GEspecifications.
GEstrongly recommends the use of new water supply
hoses.Hosesdegrade over time and need to be
replaced every 5years to reduce the riskof hose failures
and water damage.
Parts and Accessories
Order on-line at GEApplianceparts.com today, 24 hours a
day or by phone at 800.626.2002during normal business
hours.
Part Number
PM!4X!O002
Or
PM!4X!O005
Accessory
4 ft RubberWater SupplyHoses
4 ft Braided Metal Water Supply Hoses
. _WHEN NOT IN USE
[] Turn off water faucets to minimize leakage if a break
or rupture should occur. Checkthe condition of the fill
hoses;GErecommends changing the hoses every 5
years.
SAVETHESE INSTRUCTIONS
To Next Page
Loading...
