EasyManua.ls Logo

Hotpoint HDA150 - Spots and Filming on Glassware; Cloudiness on Glassware; Chipping of China

Hotpoint HDA150
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
T~
PROBLEM SOLVER
(continued)
PROBLEM
SPOTS AND
~LMING ON
GLASSES
AND
FLA~ARE
CLOUDINESS ON
GLASSWA~
CHWPING OF
CH~A
POSSIBLE CAUSE
Spotting can
be
caused
by
dl
these things:
Extremely hard water, (See How to Choose and Use Detergent section.)
Low
inlet water temperature. (See How to Test Water Temperature section.)
Overloading the dishwasher.
Improper loading. (See Loading section.)
Old
or damp powder detergent.
Phosphate level in detergent too low. (See How to Choose and Use
Detergent section.)
Rinse agent dispenser empty, (See
How
to Use a Rinse Agent section.)
Too
little
detergent. (See How to Choose and Use Detergent section.)
Local
water conditions and personal preferences vary. Try several brands of
detergents
to
find one that gives the best results for you. A liquid dishwasher
detergent may help reduce filming.
To
remove stubborn
spots
and
film
from glassware:
1.
Remove all metal utensils from the dishwasher.
2. Do not add detergent.
3. Select
HEAW
WASH cycle.
4. Start the dishwasher and allow to run for 18 to 22 minutes. The dishwasher will
now be in the main wash.
5. Then open the door and pour 2
cups
(500
ml) of white vinegar into the bottom of
the dishwasher.
6. Close the door and allow to complete the cycle.
Evinegar
dam
doesn’t work:
Repeat
as above, except use 1/4 cup (60 ml) of citric
acid crystals instead of vineg~. (Most drugstores carry citric acid crystals. If yours
doesn’t,
cdl
GE Factory Service.)
Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home
water softener.
If vinegar or
citric
acid crystal rinse doesn’t work, the cloudiness is “etching.”
The
fiim
cannot be removed.
lt
can be prevented:
Use less
detergent
if
you have soft water. Wash glassware
in
the shortest cycle that will get them
clean.
Water temperature entering dishwasher exceeds
150°F.
Rough handling can cause chipping. Load with care.
Make sure glassware and china
are secure and can’t
jar
loose. (See Loading section.) Make sure
tdl
glasses and
stemware will clear the top of the tub when you push the rack into the dishwasher.
Always use the top rack for delicate items.
14

Related product manuals