22 of 25
Service Manual UK
Whirlpool UK Appliances Ltd
English
e) Remove the lamp wiring cover by disengaging the 4 tabs and lifting away.
f) Lift the lamp holder out of its location and replace.
g) Reassemble in reverse order.
3. Motor Replacement
a) Invert the hood and place upon a protected surface.
b) Remove the grease filter and carbon filters (if fitted).
c) Remove the lamp cover surround, 2 screws T10.
d) Unscrew the lamps.
e) Slide open the filter grille and remove the motor assembly fixing screws, T20 and lift the motor
assembly off the tabs.
continued.....
To Next Page
Loading...
