This document provides comprehensive instructions for the Hotpoint HV7L 1451 washing machine, covering installation, operation, maintenance, and troubleshooting.
Function Description:
The Hotpoint HV7L 1451 is a washing machine designed for domestic use, offering a range of wash cycles and customisation options to suit various fabric types and soil levels. It features a control panel with a WASH CYCLE knob for programme selection, TEMPERATURE and SPIN SPEED knobs for customisation, and FUNCTION buttons to activate additional features. Indicator lights provide real-time feedback on the wash cycle progress and appliance status, including a DOOR LOCKED indicator for safety. The machine incorporates an automatic standby system for energy saving, activating after 30 minutes of inactivity.
Important Technical Specifications:
- Model: HV7L 1451
- Dimensions: Width 59.5 cm, Height 85 cm, Depth 51.6 cm
- Capacity: 1 to 7 kg of laundry
- Spin Speed: Up to 1400 rotations per minute
- Drum Capacity: 46 litres
- Water Connections: Maximum pressure 1 MPa (10 bar), Minimum pressure 0.05 MPa (0.5 bar)
- Energy Efficiency Class (EU No 1061/2010): A+
- Energy Consumption (Annual): 221 kWh
- Water Consumption (Annual): 9000 litres
- Spin-drying Efficacy Class: B
- Noise Levels: Washing 62 dB(A), Spinning 81 dB(A)
- Electrical Connections: Refer to the technical data plate on the machine. The appliance is supplied with a 13 amp fused plug and must be earthed.
Usage Features:
The washing machine offers a variety of wash cycles tailored for different laundry needs:
- Essentials: Includes programmes for Cottons (90°C, 60°C Standard, 40°C Standard, 20°C Standard) and Synthetics (50°C, 40°C). A Fastwash 60' cycle is available for lightly soiled garments.
- Specials: Features dedicated cycles for Baby clothes (40°C), Shirts (40°C), Lingerie (30°C), Wool (40°C), and Silk (30°C).
- Eco Cycles: These innovative programmes (Cottons, Synthetics, Fast Wash) save energy by eliminating the need to heat water, suitable for lightly to medium soiled loads. They ensure high cleaning action at low temperatures with intensified wash action and water optimisation. Liquid detergent is recommended for Eco cycles.
- Partial Wash Cycles: Includes Rinse, Spin + Pump out, and Drain only.
Personalisation Options:
- Temperature Setting: The TEMPERATURE knob allows users to set the wash temperature, including a cold wash option (8). The machine automatically prevents selecting a temperature higher than the maximum allowed for the chosen wash cycle.
- Spin Speed Setting: The SPIN SPEED knob enables adjustment of the spin speed or complete exclusion of the spin cycle (by selecting the symbol). The machine automatically limits the spin speed to the maximum allowed for the selected wash cycle.
- Functions:
- Super Wash: Increases water quantity in the initial phase and extends cycle duration for a high-performance wash.
- Extra Rinse: Enhances rinse efficiency for optimal detergent removal, particularly useful for sensitive skin.
- Mini Load: Recommended for loads equal to or less than half of the maximum recommended load.
- Reduced Creases: Modifies wash and spin cycles to minimise crease formation. At the end of the cycle, the drum performs slow rotations. For Silk and Lingerie cycles, the laundry soaks, and draining requires manual activation.
Detergents and Laundry:
- Detergent Dispenser Drawer: Divided into compartments for detergent (powder or liquid) for the wash cycle (compartment 1) and additives like fabric softeners (compartment 2). Liquid detergent should be added just before the programme starts. Hand washing detergents are not recommended due to excessive foam.
- Preparing Laundry: Laundry should be divided by fabric type, label symbols, and colours. Pockets must be emptied, and buttons checked. Load weight should not exceed specified values (refer to the "Table of wash cycles").
- Load Balancing System: Before each spin cycle, the drum rotates to distribute the load evenly, preventing excessive vibrations. If the load is unbalanced after several attempts, the machine spins at a reduced speed or performs a distribution process instead of spinning. Mixing small and large garments is recommended for better balance.
Maintenance Features:
- Cutting off Supplies: Always turn off the water tap after each wash cycle and unplug the machine during cleaning or maintenance to prevent leaks and ensure safety.
- Cleaning the Washing Machine: Outer parts and rubber components can be cleaned with a soft cloth soaked in lukewarm soapy water. Solvents or abrasives should not be used.
- Cleaning the Detergent Dispenser Drawer: The drawer can be removed by raising and pulling it out, then washed under running water. This should be done frequently.
- Caring for the Door and Drum: Leave the porthole door ajar after use to prevent unpleasant odours.
- Cleaning the Pump: The machine has a self-cleaning pump. Small items may fall into the pre-chamber, which can be accessed by removing the cover panel on the lower front part of the machine using a screwdriver. Ensure the wash cycle is finished and the appliance is unplugged before accessing.
- Checking the Water Inlet Hose: Inspect the inlet hose at least once a year for cracks and replace it if necessary. Never use second-hand hoses.
Troubleshooting:
The manual provides a detailed troubleshooting guide for common issues such as the machine not switching on, wash cycle not starting, water filling/draining problems, drainage/spin issues, poor wash results, long programme times, and excessive vibrations during spin. It also addresses noise, improper spinning, leaks, flashing indicator lights, odours, door lock issues, low water level, and excessive foam. Users are advised to check these solutions before contacting technical assistance.
Assistance:
Hotpoint offers a 12-month manufacturer's guarantee and extended guarantees (5-year parts guarantee). Contact information for Hotpoint Service in the UK and Republic of Ireland is provided for technical assistance, parts and accessories, and appliance registration. The manual also includes recycling and disposal information, emphasising responsible disposal of packaging and old appliances.