Hotpoint WMF 740 P User Manual

1
GB
English, 1
Contents
Installation, 2-3-4-5
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Description of the washing machine and
starting a wash cycle, 6-7
Control panel
Indicator lights
Starting a wash cycle
Wash cycles, 8
Table of wash cycles
Personalisation, 9
Setting the temperature
Setting the spin speed
Functions
Detergents and laundry, 10
Detergent dispenser drawer
Preparing the laundry
Garments requiring special care
Load balancing system
Precautions and tips, 11
General safety
Disposal
Opening the porthole door manually
Care and maintenance, 12
Cutting off the water or electricity supply
Cleaning the washing machine
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Troubleshooting, 13-14
Assistance, 15-16
GB
WMF 740 P/G/A/K/X
Instructions for use
WASHING MACHINE

Hotpoint WMF 740 P Specifications

General

Brand	Hotpoint
Model	WMF 740 P
Category	Washer
Language	English

Summary

Installation Guide

Unpacking and Levelling Your Washing Machine

Covers removing packaging, checking for damage, and ensuring the machine is stable and level.

Connecting Water and Electricity Supplies

Details connecting the water inlet hose to the tap and the machine, ensuring proper water supply.

Connecting the Drain Hose

Instructions for properly connecting the drain hose to a drain or sink trap to prevent siphoning.

Electrical Connection Safety

Guidance on ensuring the mains socket is earthed, compatible, and safely wired for the appliance.

Washing Machine Operation Guide

Control Panel Overview

Indicator Light Meanings

Starting a Wash Cycle

Provides a step-by-step guide on how to load laundry, select a programme, and start a wash cycle.

Precautions and Safety Tips

General Safety Guidelines

Essential safety guidelines for operating the washing machine, including child safety and electrical precautions.

Care and Maintenance Procedures

Cutting off Water and Electricity Supplies

Procedures for turning off water and unplugging the machine before cleaning or maintenance.

Troubleshooting Common Issues

Machine Not Starting or Filling

Solutions for common issues preventing the machine from powering on or starting a cycle.

Water Flow and Drainage Issues

Addresses problems with continuous filling/draining, water retention, and failure to drain/spin.

Performance and Vibration Problems

Noise and Leak Diagnosis

Operational Faults and Smells