To Next Page
C
Carla PerezJul 30, 2025
What to do if my HOUNO Combislim CPE displays an error code?
- WwilliamsstevenJul 30, 2025
If your HOUNO Oven displays an error code, there are several troubleshooting steps you can take. First, access the test menu (main alarm) to check if the overheating thermo switch has tripped, and if so, reset it. Next, verify that the fan is running and that the solid state relay is functioning correctly. Also, inspect the cable and cable plugs for any issues. If these steps do not resolve the issue, consider replacing the overheating sensor or the I/O board.
General