Why does my Housegard SA411S Smoke Alarm keep going off when there is no smoke?
If your Housegard Smoke Alarm goes off when there is no smoke, or during activities like cooking, you should clean the smoke alarm. If the problem persists, consider changing the location of the smoke alarm.
What to do if my Housegard Smoke Alarm flashes and emits a short audible signal every 32 seconds?
If your Housegard Smoke Alarm flashes and emits a short audible signal every 32 seconds, this indicates low battery charge. Replace the batteries to resolve this issue.
How to fix a Housegard SA411S that gives off no signal when tested?
If your Housegard Smoke Alarm gives off no signal when tested, first take the smoke detector down and check that the batteries are fitted correctly. Then, check that the batteries still have some charge.
Describes the function of the separate TEST and HUSH/PAUSE buttons on the smoke alarm.
General| Alarm decibels | 85 dB |
|---|---|
| Fire alarm control unit | Yes |
| Central control unit color | White |
| Carbon monoxide (CO) detector | - |
| Power source | AC/Battery |
| Input voltage | 240 V |
| Battery voltage | 9 V |
| AC input voltage | 230 V |
| Power source type | AC |
| Central control unit operating temperature (T-T) | 0 - 45 °C |
| Detector type | Optical detector |
| Connectivity technology | Wired |
| Certification | CE, EN 14604 |
Weight and Dimensions| Height | 457 mm |
|---|---|
| Diameter | 127 mm |
To Next Page
