EasyManuals Logo

Hoval HomeVent comfort FR 201 User Manual

Hoval HomeVent comfort FR 201
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
4 215 415 / 02
7
Subject to modications
If the comfort ventilation unit is located in an
unheated room, the supply and extract air lines
must thermally insulated.
The ducts must be leak-tight.
Check the supply air outlets for dirt build-up and
clean them if necessary.
Extract air points must be free and clean.
The fresh air intake must be clean and
unobstructed.
The lters must be clean.
The HomeVent
®
comfort ventilation unit must be
connected to the mains.
Electrical connecting lines must be intact.
The comfort ventilation unit must be inspected and
serviced regularly. The cleaning and maintenance
intervals depend to a great extent on the running
time and the degree of contamination in the ambient
air (e.g. dust, tra󰀩c etc.).
The HomeVent
®
operator terminal must be
connected to the comfort ventilation unit.
6.2 Switching on
Connect the mains plug of the HomeVent
®
comfort
ventilation unit to the device and in the socket.
Set the operator terminal to the desired operating
mode.
7 Maintenance
The comfort ventilation unit must be inspected and ser-
viced regularly. The cleaning and maintenance intervals
depend to a great extent on the running time and the
degree of contamination in the ambient air (e.g. dust,
tra󰀩c etc.).
i
Thorough cleaning of the HomeVent
®
Comfort ventilation unit by Hoval Cus-
tomer Service or an installer trained by
Hoval.
i
Conclude a service agreement with Ho-
val, and your HomeVent
®
comfort ven-
tilation unit will be serviced regularly by
Hoval Customer Service.
7.1 Supply air an extract air filter
Caution:
Do not operate the comfort ventilation unit
unless the lters are tted!
i
Replace the lters after the pollen season
if you have a pollen allergy.
7.1.1 Filter soiling
The supply air and extract air lters are time-monitored.
The end of the set operating time is displayed on the
operator terminal. The lter replacement interval can be
adapted to local conditions.
Operator terminal BG02E:
Operating mode display LED lights up orange.
TopTronic E
®
room control module comfort plus:
operating mode display LED lights up orange and is
supplemented by a warning triangle on the display.
COMMISSIONING AND MAINTENANCE

Other manuals for Hoval HomeVent comfort FR 201

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hoval HomeVent comfort FR 201 and is the answer not in the manual?

Hoval HomeVent comfort FR 201 Specifications

General IconGeneral
TypeDecentralized ventilation unit with heat recovery
AirflowUp to 200 m³/h
Heat recovery rateUp to 90%
Voltage230 V
Frequency50 Hz
Filter classG4
WeightApprox. 25 kg
MountingWall mounting
Airflow rateAdjustable, multiple stages

Related product manuals