Need help?Do you have a question about the Hoval PowerBloc EG 20 and is the answer not in the manual?
General| Frequency | 50 Hz |
|---|---|
| Power Output | 20 kVA |
| Engine Type | Diesel |
| Fuel Consumption | 5.5 l/h at 75% load |
| Voltage | 400 V |
| Cooling System | Water-cooled |
| Starting System | Electric start |
| Phase | Three-phase |
General guidelines for personnel qualifications, instruction, and safe operation.
Explains hazard symbols on the product and within the manual.
Details risks related to fire, mechanical, and electrical hazards.
Specific safety guidance for fuel, generator, engine, and systems.
Steps and safety measures for initial plant setup, connection, and start-up.
Advanced settings for service technicians, including oil, temperature, manual control, and system parameters.
Information on plant stop conditions, error codes, and troubleshooting procedures.
Explanation of warning signals and compliance with machinery standards.
Critical safety warnings and general precautions for maintenance personnel.
Step-by-step guide for installing the remote monitoring hardware.
Instructions for configuring the CHP plant's network settings for remote access.
To Next Page
