EasyManua.ls Logo

Hover-1 EDGE 2.0 - Bluetooth Speaker Operation; Bluetooth Pairing Process; Wireless Music Playback

Hover-1 EDGE 2.0
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The Edge 2.0 has a powerful built-in wireless speaker, so you can play your
music while riding.
PAIRING THE SPEAKER
1) Turn on your EScooter. The speaker will “ping” to announce that it’s
waiting for a Bluetooth
®
connection. This will indicate your EScooter’s
speaker is now in pairing mode.
2) Place the EScooter and the Bluetooth
®
device you would like to pair
within the operating distance. We recommend keeping the two devices no
further than 3 feet (1 meter) apart during pairing.
3) Ensure Bluetooth
®
is enabled on your phone or music device. Refer to
the manufacturer’s instructions for how to enable Bluetooth
®
on your
device.
4) Once you have activated Bluetooth
®
on your device, select the option
“DSAEDGE” from the list of available Bluetooth
®
devices.
5) If prompted, enter the PIN code “000000” and conirm the entry.
6) The speaker will say “paired” when successfully paired.
7) Please note, pairing mode on the EScooter will last for two minutes. If no
devices are paired after two minutes, the EScooter speaker will
automatically return to standby mode.
8) If pairing is unsuccessful, turn o the EScooter irst and try again
following the previous steps.
9) If your smartphone is out of range, or the battery is low on your
EScooter, the speaker may disconnect from your device, and the speaker
will say “disconnected.” To reconnect, follow the previous steps, or
recharge your EScooter.
NOTE: Once you have paired the EScooter speaker with a device, the
speaker will remember the device and will pair automatically when the
devices Bluetooth
®
is activated within range. You do not need to re-pair any
previously connected devices.
Your EScooter can pair with up to two multi-point devices at a time. You
can reconnect a previously paired device without going through the
pairing process for up to two devices.
LISTENING TO MUSIC
Once the Bluetooth
®
speaker is paired to your device, you can stream
music wirelessly through it. Select the track you wish to listen to on your
device. All volume and track controls will be made using your music
device. Should you encounter any problems while streaming, please refer
to your device’s user manual.
BLUETOOTH
®
SPEAKER
17

Related product manuals