YOUR
NEW
MACHINE
On receipt of your new "Gem" first read and study the
instruction manuals for both engine and machine.
Satisfactory performance and a long working life for your
Rotavator will depend upon your following the instruc-
tions given. Be certain to keep the manuals in a safe,
convenient place ready for quick reference.
When in need of spare parts or service, contact your
Howard dealer. He has genuine replacement Howard
parts, and trained, experienced staff to service your
machine correctly.
Before starting to use your "Gem", first fill the fuel tank,
check the gearbox and chaincase oil levels, and the
lubrication points. Check that all nuts and bolts are
tight.
Run the machine lightly at first, and gradually increase
the loads during the first
25
hours work. NEVER allow
the engine to labour during this running-in period.
After the first five hours of operation, check all nuts and
bolts for tightness, including the two wheel hub centre
nuts.
CONTROLS
HANDLEBAR
ROTOR
IGNITION
ENGAGEMENT
LEVER
9a
B
THROTTLE
CONTROL
EAR
LEVER
To Next Page
Loading...
