To Next PageTo Next Page
Need help?Do you have a question about the Howden Roots Universal RAI Series and is the answer not in the manual?
Specifies approved limiting conditions for pressure, temperature, and speed for satisfactory performance.
Methods for handling units without baseplates, using lifting lugs or slings.
Procedures for lifting units mounted on baseplates using slings.
Advice on unit mounting, levelling, and ensuring a solid, strain-free installation.
Detailed instructions and recommendations for lubricating the blower's gear and drive ends.
Guidelines for assessing blower vibration levels at bearing locations for proper operation.
Connection and drive shaft data for URAI air blowers.
Connection and drive shaft data for URAI-DSL air blowers.
Connection and drive shaft data for URAI-G gas blowers.
Connection and drive shaft data for URAI-J WHISPAIR blowers.
Metric connection and drive shaft data for URAI-J Metric WHISPAIR blowers.
Metric connection and drive shaft data for URAI-M and URAI-DSL Metric blowers.
General
