RECOMMENDED SPARES LIST
HOWDEN COMPRESSOR MODELS: Mk1G/H WRV(H) 163/145 & 180
Replacement Shaft Seal Kit – KS163
Input Shaft Seal c/w Cover ‘O’ Ring
Annual Inspection Kit – KW163-1
Ball Bearing (Actuator Spindle)
Locking Wire – 1/32” Dia.
Lockwasher 50mm (Thrust Bearings)
Lockwasher 30mm (Piston Rod / Slide Valve)
PTFE Ring (Actuator Piston)
‘O’ - Ring Kit containing:
G44001 – ‘O’Ring (Piston Rod)
G44005 – ‘O’Ring (Actuator Spindle)
G44006 –‘ O’Ring (Cylinder Cover)
G44052 – ‘O’Ring (Main / Inlet / Outlet)
G44053 – ‘O’Ring (Actuator Piston)
G44054 – ‘O’Ring (Rotor Covers)
G44055 – ‘O’Ring (Cylinder Spigot)
Retaining Ring (Actuator spindle – Outer)
Retaining Ring (Actuator spindle – Inner)
Retaining Ring (Journal Bearings)
Suction and Discharge joints are not part of Inspection Kit. These are available at extra cost as
required.
Replacement Thrust Bearing Kit – KWT163
Replacement Journal Bearing Kit – KWJ163
Outlet End Journal Bearing
Inlet End Journal Bearing
Note: For Viton or Fluorosilicone ‘O’ Rings please contact:
Howden Compressors Limited, Compressor Business Unit, 133 Barfillan Drive, Glasgow, G52 1BE, UK
Telephone: +44 (0)141 882 3346 Fax: +44 (0)141 882 8648
To Next Page
Loading...
