Howden WRV - Page 60

59
RECOMMENDED SPARES LIST
HOWDEN COMPRESSOR MODELS: Mk6 6A & 6B WRV(H) 204/110, 145, 165 & 193
 Replacement Shaft Seal Kit – KS204
PART NUMBER
DESCRIPTION
QUANTITY
KWS204
Input Shaft Seal c/w Cover ‘O’ Ring
1
 Annual Inspection Kit – KW204-6
PART NUMBER
DESCRIPTION
QUANTITY
R20224
Rotor Locking Plate
2
G26019
Tuflock Screw ¼” UNC x ⅝” LG
6
G31015
Spring Washer M16
56
G33001
Bonded Seal ⅜” BSP
2
G33003
Bonded Seal ¾” BSP
4
G33004
Bonded Seal 1” BSP
3
G33008
Bonded Seal ¼” BSP
4
G34060
Dowel Pin 6mm Dia. x 10mm LG
4
G51001
Ball Bearing (Actuator Spindle)
1
G72002
Locking wire – 1/32” Dia.
2 metres
Q5163
Lockwasher 40mm ( Actuator Piston)
1
R20313
Locknut (Slide Valve)
1
R20493
Superfeed Joint
1
R25055
Piston Locknut 40mm
1
R20065
PTFE Piston Ring
1
R25145
PTFE Piston Rod Ring
1
R20101 - OK
‘O’ Ring Kit containing:
G44001 – ‘O’Ring (Piston Rod)
1
G44005 – ‘O’Ring (Actuator Spindle)
1
G44007 – ‘O’Ring (Actuator Piston)
1
G44021 – ‘O’Ring (Main / Inlet / Outlet)
2
G44071 – ‘O’Ring (Rotor Covers)
2
G44072 – ‘O’Ring (Cylinder Spigot)
1
G44073 –‘ O’Ring (Cylinder Dia.)
1
G44074 – ‘O’Ring (Cylinder Face)
2
G60004
Retaining Ring (Actuator spindle – Outer)
1
G60005
Retaining Ring (Actuator spindle – Inner)
1
G60178
Circlip (Journal Bearings)
4
Suction and Discharge joints are not part of Inspection Kit. These are available at extra cost as
required.
 Replacement Thrust Bearing Kit – KWT204
PART NUMBER
DESCRIPTION
QUANTITY
G51034
Angular Contact Bearing
4
 Replacement Journal Bearing Kit – KWJ204-5/6
PART NUMBER
DESCRIPTION
QUANTITY
R20232
Inlet End Journal Bearing
2
R20242
Outlet End Journal Bearing
2
G34060
Dowel Pin 6mm
4
Note: For Viton or Fluorosilicone ‘O’ Rings please contact:
Howden Compressors Limited, Compressor Business Unit, 133 Barfillan Drive, Glasgow, G52 1BE, UK
Telephone: +44 (0)141 882 3346 Fax: +44 (0)141 882 8648