What to do if my Howdens HJA2241 does not operate?
If your Howdens Ventilation Hood isn't working, the issue might be with the power supply. First, check the fuses in the fuse box and replace or reset them if necessary. Also, ensure that all power connections are properly connected.
Why do the lamps on my Howdens Ventilation Hood fail to operate?
If the lamps on your Howdens Ventilation Hood aren't working, it could be due to a few reasons. A replacement lamp may be needed; however, first ensure the lamp is correctly fitted into its holder. Remember to disconnect the mains electricity supply before adjusting or replacing the lamps, and allow the bulb to cool down before handling it. Also, check your fuse box to see if a fuse has blown or tripped and replace or reset the fuses if needed.
General| Model | HJA2241 |
|---|---|
| Type | Integrated |
| Material | Stainless Steel |
| Number of Motors | 1 |
| Number of Speeds | 3 |
| Control Type | Slider |
| Lighting | LED |
| Voltage | 220-240V |
| Frequency | 50Hz |
| Width | 600mm |
| Filter Type | Aluminium |
To Next Page