hoxter HAKA 37/50 - User Manual

Other manuals for hoxter HAKA 37/50

Instruction And Operating Manual For End Consumer208 pages

Manual For Installation21 pages

Questions and Answers

D
Dr. Barbara WagnerAug 4, 2025
Why is the glass on my hoxter HAKA 37/50 Indoor Fireplace getting dirty?
- H
  Heidi BautistaAug 4, 2025
  Dirty glass on your hoxter Indoor Fireplace can be caused by several factors. It could be due to using the wrong type of fuel. It may also result from a low amount of air in the burn chamber; ensure the air control lever is between the MAX and MID positions during burning. A low draft in the chimney or an unclean heat exchanger could also be the cause. If none of these are the issue, contact the company that installed the fireplace.
D
Dustin VegaAug 10, 2025
What to do if smoke is leaking into the living room from my hoxter Indoor Fireplace?
- A
  Amy NewmanAug 10, 2025
  If smoke is leaking into your living room from your hoxter Indoor Fireplace, several factors could be to blame. Ensure you are using the correct fuel. Check the conditions for burning in the transitional periods for a low chimney draft. Opening the door too fast or loading wood during the wrong burning phase can also cause this issue; follow the rules for starting the fire and loading. Lastly, a dirty heat exchanger could be the culprit; make sure to clean it.
P
Patricia BrownAug 16, 2025
Why is my hoxter HAKA 37/50 Indoor Fireplace fire not starting or keeps dying?
- L
  landrymichaelAug 16, 2025
  If your hoxter Indoor Fireplace's fire isn't starting or keeps dying, consider these possible causes. Ensure you're using the correct fuel. Try slowly moving the air control lever to the MAX position to increase airflow. Also, check for low draft in the chimney and examine the heat exchanger, cleaning it if necessary. If problems persist, contact the company that installed the fireplace.
W
wjonesAug 22, 2025
Why does my hoxter Indoor Fireplace wood burn too fast?
- W
  William GarciaAug 23, 2025
  If the wood in your hoxter Indoor Fireplace is burning too fast, several factors could be responsible. Make sure you are using the correct type of fuel. Ensure that you are using the appropriate wood load for your fireplace, referring to the attachment at the end of the brochure. Check that the air control is set correctly by following the rules for starting the fire and loading. Also, ensure the door is fully closed.
A
antonio42Aug 28, 2025
Why is my hoxter HAKA 37/50 making noises?
- T
  Tyrone PenaAug 28, 2025
  Noises from your hoxter Indoor Fireplace insert can stem from a few sources. Thermal expansion of the steel during heating and cooling can cause random noises, which is normal and doesn't affect functionality. The circular pump starting can also produce noise when the water in the exchanger is fully heated. Make sure you're using the correct wood load. If the temperature in the accumulation tank is too high, stop loading wood. For a malfunction of the valve of the cooling loop, contact the company that installed the fireplace. Also, in the event of a blackout, stop loading wood.