Need help?Do you have a question about the Hozelock Cyprio Aquaforce 6000 and is the answer not in the manual?
Guidelines on pump usage for ponds only and responsible adult operation.
Warnings about unplugging appliances and handling cables safely.
Notes on freezing conditions, sunlight exposure, running dry, and temperature limits.
Requirements for RCD, earthing, and consulting electricians.
Checking voltage, cable details, and extension cable requirements.
Steps for preparing the pump for submerged use, including parts assembly.
Connecting the outlet adaptor and securing the pump to its mounting area.
Locating the cable and securing the pump cage lid.
Checking ball joint alignment and screwing on the hosetail.
Guidance on hose diameter selection and cutting hosetail steps.
Recommendations for pump placement in the pond for best results.
Instructions for using and removing the fish protection insert.
Adjusting water flow using the flow control mechanism.
Connecting hoses for satellite filters or skimmers.
Routine checks and cleaning intervals for pump performance.
Cleaning procedures for hard water areas and limescale deposits.
Step-by-step guide to disassembling the 6000/8000 pump models.
Step-by-step guide to disassembling the 12000/15000 pump models.
Advice on removing, cleaning, and storing the pump during winter.
Common causes and solutions for reduced water flow from the pump.
Diagnostic steps for when the pump has no water flow.
General| Maximum Flow Rate | 6000 L/h |
|---|---|
| Cable Length | 10 m |
| Voltage | 230 V |
| Outlet Size | 25mm |
| Inlet/Outlet Size | 25 mm / 32 mm |
To Next Page
