How to use the Pulsating Sprinkler (2550)
Setup
Start by pushing the metal spike firmly all the way into the
ground, in the centre of the area to be watered (A), or placed
in the middle of one side (B).
This product is best placed into a lawn or the soil of a garden bed.
A B
Push the sprinkler down, ideally with two
hands, holding on to the bottom parts of
the sprinkler, as shown. Take care not to
push down on the top of the sprinkler.
Next, with the water supply turned o, connect your hose connector.
It is now ready to use and will start spraying water when you turn on the tap.
Please note: This image is not to scale.
To Next Page
Need help?
General