▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ safety information
217-241-3.fmIDM
English
- 14 -
DANGER, WARNING AND CAUTION LABELS 13
The figures represent the safety and information sig-
nals applied to the machine. The meaning of each
signal is explained beside the machine.
– General danger: before operat-
ing the machine, carefully read
and comprehend this manual.
Keep to the safety standards and
provisions during machine opera-
tion.
– General danger: prior to carrying
out maintenance or repair work,
stop the motor and remove the ig-
nition key.
– General danger: lifting point with
hook tool.
– General danger: lifting point with
fork tool.
– Danger of entanglement: when
the motor is running,
do not open
or remove the guard.
– Danger of entanglement: when
the motor is running, do not open
or remove the guard.
– Danger of catching: prior to
starting the machine, close the
safety guard.
– Danger of shearing: do not ex-
pose your upper limbs to the cut-
ting elements.
– Danger of explosion: the hy-
draulic accumulators contain gas
and oil under pressure. For their
removal or repair, follow the in-
structions contained in the techni-
cal manual.
– Danger of body crushing: prior
to intervening in zones of poten
tial
danger, insert the safety block.
– Danger of body
crushing: when
the lifter is in operation stay out-
side the working range of the
three-point tool.
– Danger of body crushing: prior
to unhooking or parking the ma-
chine, put the wedges in place.
– Crashing hazard for the body: DO NOT
STAND or LOITER in the machine's range of ac-
tion when the turntable is activated.
To Next Page
Loading...
