Need help?Do you have a question about the HP Enterprise Aruba 2540 and is the answer not in the manual?
Details about the front panel of the switches, including ports and LEDs.
Information regarding the rear panel connectors and features of the switches.
Overview of the key functionalities and capabilities of the Aruba 2540 switches.
Lists the components shipped with the Aruba 2540 switches, including accessory kits.
Step-by-step guide for installing the Aruba 2540 switches in various environments.
Safety and environmental warnings and guidelines for installing the switches.
Essential steps for initial configuration, including IP address and password setup.
How to use the console interface for initial switch setup and configuration.
Information on how to download and apply software updates to the switch.
Procedure to recover access if the manager password is lost.
Steps to access and manage the switch using a Telnet session.
How to access and manage the switch using its web browser interface.
General advice and common issues to check when troubleshooting switch problems.
Interpreting LED status indicators for troubleshooting general and PoE-related issues.
Overview of built-in management capabilities for proactive network management.
Procedures for testing switch hardware and connectivity.
Steps to reset the switch to its original factory default settings.
Guidance on downloading and installing new software for the switch.
Information on how to contact HPE for product support and assistance.
Covers physical, electrical, environmental, and acoustics details of the switches.
Details on safety, EMC, and technology standards the switches adhere to.
Guidelines on recommended cable types and categories for network connections.
Maximum supported distances for various network technologies and cable types.
Information on when and how to use mode conditioning patch cords for fiber optic links.
Details on RJ-45 connector pin assignments, Auto-MDIX, and wiring rules.
Information on how to contact Hewlett Packard Enterprise for technical assistance.
Locations for downloading software updates, product documentation, and support resources.
Instructions for providing feedback on the product documentation.
Details about the warranty coverage for HPE networking products.
Information regarding RoHS compliance and other regulatory declarations.
General| Model | Aruba 2540 |
|---|---|
| Type | Managed Switch |
| Product Series | Aruba 2540 |
| Uplink Ports | 4 x 1/10G SFP+ |
| Power over Ethernet (PoE) | Available on some models (PoE+) |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.9 Mpps (48-port models) |
| Memory | 512 MB |
| Flash Memory | 256 MB |
| Management | Web GUI, CLI, SNMP |
| Features | Layer 2 features, VLANs, QoS, ACLs |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10 to 95% non-condensing |
| Power Supply | Internal power supply (100-240V AC) |
| Ports | 24 or 48 10/100/1000 ports |
To Next Page
