ENWW Printing custom-sized media and card stock 27
Printing custom-sized media and card stock
The HP LaserJet 1005 Series Printer can print on custom-sized media or card stock between
76 by 127 mm (3 by 5 in.) and 216 by 356 mm (8.5 by 14 in.).
CAUTION Make sure that the media is not stuck together before you load it.
To print on custom-sized media or card stock
1 Open the straight-through output door.
2 Load the media with the narrow side forward and the side to be printed facing up.
Adjust the media guides to fit the media.
3 Select the correct media size in the printer settings. (Software settings can override printer
properties.)
4 Access the printer properties. See Printer properties (driver)
for instructions. Click the Paper
tab, select the appropriate media from the Optimize for drop-down list, and click OK.
5 Print the document.
To Next Page
Loading...