HP 1032 User Manual

% /opt/clusterpack/bin/manager_config
Back to Top
Step 7 Configure the ProCurve Switch
Background
The ProCurve Switch is used for the management network of the cluster.
Overview
The IP address for the ProCurve Switch should be selected from the same IP subnet that will be used for
Compute Nodes.
Details
z
Select an IP address from the same IP subnet that will be used for the Compute Nodes.
z
Connect a console to the switch
z
Log onto the switch through the console
z
Type 'set-up'
z
Select IP Config and select the "manual" option
z
Select the IP address field and enter the IP address to be used for the switch
Back to Top
Step 8 Copy the License Files to the Management Server
Background
Copy the license files onto the Management Server. The license files can be placed in any convenient
directory that is accessable to the Management Server. During the invocation of the manager_config tool
you will be asked to provide a path to the license files. As part of manager_config the license files will b
e
installed into the correct locations on the machine, and all licensing services will be started.
Overview
Put the files in any convenient directory on the Management Server.
Details
%
/usr/bin/ftp your_host
% > cd your_home

HP 1032 Specifications

General

Brand	HP
Model	1032
Category	Software
Language	English