HP 1032 User Manual

Note:
It may take up to 24 hours to receive the license file. Plan accordingly.
For more information, see the Comprehensive Instructions for this step.
References:
z
Step 4 Obtain a License File
Back to Top
Step Q5 Prepare Hardware Access
Get a serial console cable long enough to reach all the Compute Nodes from the
Management Server.
Note:
If you are installing ClusterPack on Compute Nodes for the first time, DO
NOT power up the systems, ClusterPack will do that for you automatically.
If you do accidentally power the compute nodes, DO NOT answer the HP-
UX boot questions.
For more information, see the Comprehensive Instructions for this step.
References:
z
Step 5 Prepare Hardware Access
Back to Top
Step Q6 Power Up the Management Server
Perform a normal first boot for the Management Server.
For more information, see the Comprehensive Instructions for this step.
References:
z
Step 6 Power Up the Management Server
Back to Top

HP 1032 Specifications

General

Brand	HP
Model	1032
Category	Software
Language	English