HP 10GbE Pass-Thru Module - Page 4

HP NC542m Dual Port Flex-10 10GbE Multifunction BLc Adapter
HP NC550m Dual Port Flex-10 10GbE Multifunction BLc Adapter
HP NC552m Dual Port Flex-10 10GbE Multifunction BLc Adapter
HP NC551m Dual Port FlexFabric 10Gb Network Adapter
HP NC544m HP InfiniBand QDR/Ethernet 10Gb 2P 544M Adapter
HP NC554m HP FlexFabric 10Gb 2-port 554M Adapter
QLogic QMH4062 1GbE iSCSI Adapter for HP BladeSystem c-Class
NOTE: Some adapters listed above may be discontinued.
Cabling and Transceivers SFP+ Direct attached cables :
HP 1m SFP+ 10GbE Copper Cable
HP 3m SFP+ 10GbE Copper Cable
HP 5m SFP+ 10GbE Copper Cable
HP 7m SFP+ 10GbE Copper Cable
HP 10-GbE SFP+-SFP+ 1m Direct Attach Cable
HP 10-GbE SFP+-SFP+ 3m Direct Attach Cable
HP 10-GbE SFP+-SFP+ 7m Direct Attach Cable
NOTE: The above cables have been tested and verified to work with the HP 10GbE Pass-Thru Module.
However, the module will accept cables from any vendor. HP does not guarantee the performance of non
HP cables and users may receive a warning message via the CLI when a non verified cable has been
inserted.
Transceivers :
HP BladeSystem 10Gb SR SFP+
HP BladeSystem 10Gb LR SFP+
HP BladeSystem 10Gb LRM SFP+
HP BladeSystem 1Gb SX SFP Opt Kit
HP BladeSystem 1Gb RJ-45 SFP Opt Kit
NOTE: Only HP transceivers listed above may be used in the HP 10GbE Pass-Thru Module.
QuickSpecs
HP 10GbE Pass-Thru Module
Compatibility
DA - 13508 North America — Version 8 — August 17, 2012 Page 4