HP 15-bs0 Series - System Board

System board
NOTE: The system board spare part kit includes replacement thermal materials.
Description Spare part number
System board (includes replacement thermal materials):
All system boards use the following part numbers:
xxxxxx-001: Non-Windows operating systems
xxxxxx-601: Windows 10 operating system
For use in models with discrete graphics memory:
●
Intel Core i7-7500U processor and 4 GB of discrete graphics memory 924759-xx1
●
Intel Core i7-7500U processor and 2 GB of discrete graphics memory 924757-xx1
●
Intel Core i5-7200U processor and 4 GB of discrete graphics memory 924758-xx1
●
Intel Core i5-7200U processor and 2 GB of discrete graphics memory 924756-xx1
●
Intel Core i3-6006U processor and 2 GB of discrete graphics memory 924755-xx1
●
Intel Pentium N3710 processor and 2 GB of discrete graphics memory 924760-xx1
For use in models with UMA graphics memory:
●
Intel Core i7-7500U processor 924752-xx1
●
Intel Core i5-7200U processor 924751-xx1
●
Intel Core i3-7100U processor 924749-xx1
●
Intel Core i3-6006U processor 924750-xx1
●
Intel Pentium N3710 processor 924754-xx1
●
Intel Celeron N3060 processor 924753-xx1
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 34).
5. Remove the optical drive (see Optical drive on page 35), if installed.
6. Remove the bottom cover (see Bottom cover on page 45).
7. Remove the WLAN module (see WLAN module on page 48).
8. Remove the memory module (see Memory module on page 50).
9. Remove the solid-state drive (see Solid-state drive (SSD) on page 58).
To remove the system board:
Component replacement procedures 69