HP 2510p - Compaq Business Notebook Setup Guide

Select To do this
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION: Disabling the USB port also disables
MultiBay devices and ExpressCard devices on the
advanced port replicator.
●
Enable/disable the 1394 port.
AMT Options (all are disabled by default) NOTE: All AMT options are disabled by default.
●
Enable/disable Firmware Verbosity.
●
Enable/disable AMT Setup Prompt (CTRL-P).
●
Enable/disable USB Key Provisioning Support.
●
Enable/disable Unconfigure AMT on Next Boot.
●
Enable/disable Terminal Emulation Mode
●
Enable/disable Firmware Progress Event Support.
●
Enable/disable Include TYPE-131 in SMBIOS.
Set Security Level Change, view, or hide security levels for all BIOS menu items.
Restore Security Defaults Restore the default security settings.
12 Chapter 3 Computer Setup menus

HP 2510p - Compaq Business Notebook Specifications

General

Display	12.1-inch WXGA (1280 x 800)
Graphics	Intel GMA X3100
Processor	Intel Core 2 Duo U7600
RAM	Up to 4 GB DDR2 SDRAM, 667 MHz
Storage	80/120 GB 5400 RPM
Operating System	Windows Vista Business
Battery Life	Up to 6 hours
Wireless	Intel PRO/Wireless 3945ABG or 4965AGN
Dimensions	28.2 x 21.4 x 2.35 cm
Ports	3 USB 2.0, VGA, headphone/microphone jacks, docking connector
Optical Drive	External (optional)