HP 3000 Series - Order Supplies

Step No.
3.27
TRANSMISSION I'lODE?
0
0 or 1
Configuring MPE
Prompt and Response
(IML/3000}
(DS/3000, RJE/3000, and MRJE/3000)
0 = Full Duplex; 1 = Half Duplex
(Note: Subtype 3 requires full duplex, except when the
ItJP is hardwired to an SSLC. For hardwired INP-to-
SSLC, always configure both devices as Subtype 1 and
Transrniss ion Clode 1. )
3.28 PREFERRED BUFFER SIZE? {in words)
Q.-1024 (DS/3000 -- 1024 recommended)
3.29 DRIVER CHANGEABLE? NO
3.30 DRIVER OPTIONS? 0
3.50
DRIVER NAME?
IOINPO
(MRJE/3000 ignores your response)
(RJE/3000 and IML/3000
this option)
override
I
I
Prompts 3.52 through 3.55 appear only when subtype 0 has been I
specified. (DS/3000, RJE/3000, and MRJE/3000)
3.52 PHONELIST?
YES or NO
return
(DS/3000 and RJE/3000)
(MRJE/3000)
3.53 PHONE NUMBER? telephone number or return
(Asked only if your response to
3.52 was YES.}
3.54 LOCAL ID SEQUENCE? id sequence or return
I
{MRJE/3000 ignores your response) I
3. 55 REMOTE ID SEQUEtJCE? id sequence or return
(MRJE/3000 ignores your response) I
JUN 1980
c-s