HP 3000 Series

E-mail Server
Use the E-mail Server screen to configure e-mail settings for outgoing and incoming e-mail. Use the
settings on this screen to send and receive e-mail messages, including product alerts. The following
illustration, table, and procedures describe how to use this screen.
1
2
3
Figure 3-2 E-mail Server screen
Table 3-2 E-mail Server
Callout Area on the screen Information or capability that the area provides
1 Outgoing e-mail Configure outgoing e-mail if you intend to use the Alerts or
AutoSend features. For more information, see
Sending e-mail
commands to the product.
2 Device E-mail Address This is the device's e-mail address that appears in device alerts.
This is not the e-mail address that you want to use when sending
commands to the device. For more information, see
Sending e-mail
commands to the product.
3 Incoming e-mail (not required for E-mail
Alerts)
Configure incoming e-mail if you intend to request information
pages from the device by using e-mail messages. For more
information, see
Sending e-mail commands to the product.
ENWW E-mail Server 29
Settings tab