EN
Product specifications
17
Table 4. Power specifications
Category Specification
Power requirements 100 to 127 Volts alternating current (Vac) +/-10%; 50 to 60 hertz
220 to 240 Vac +/-10%; 50 hertz
Power consumption (in
continuous copy mode)
135 watts
Power consumption (idle) 9 watts
Minimum recommended
circuit capacity
4.2 amps (110 volts)
2 amps (220 volts)
(4.2 amps maximum pull)
Table 5. Operating acoustical emissions (per ISO 9296) specifications
Category Specification
Sound Power Level,
L
WAd
(1 bel = 10 decibels)
5.7 bels (B)
Sound Pressure Level,
L
pAm
(Operator Position)
52 decibels (dB)
Sound Pressure Level,
L
pAm
(Bystander Position)
43 dB
Table 6. Skew specifications
Category Specification
Print skew—left 0.6% (1.5 mm over 250 mm in length)
Print skew—right angle
accuracy
0.64% (1.2 mm over 190 mm in width)
Scan skew 1.2%
To Next Page
Loading...