HP 3150 - Page 90

88 Removal and replacement
EN
Covers
Back cover
1 Unplug the power cord and phone cord(s) and remove the
parallel cable from the back of the printer.
2 Remove all supports and bins.
3 Press the printer door release latches and open the printer door.
4 Remove the toner cartridge.
5 Rotate the HP LaserJet 3100/3150 product so that you face the
back of the product.
6 Remove the four (4) screws (callout 1) from the back cover.
Figure 16. Back cover removal (1 of 2)
2
1