HP 3550

To disable AppleTalk
1. Press M ENU to enter the MENUS.
2. Press
to highlight Configure Device.
3. Press
to select Configure Device.
4. Press
to highlight I/O.
5. Press
to select I/O.
6. Press
to highlight EIO 1.
7. Press
to select EIO 1.
8. Press
to highlight APPLETALK.
9. Press
to select APPLETALK.
10. Press
to select ENABLE.
11. Press
to highlight OFF.
12. Press
to select OFF. The control panel displays a message that the setting has been
saved and displays an option to re-enable AppleTalk.
13. Press M
ENU to return to the Ready state.
To disable DLC/LLC
1. Press M ENU to enter the MENUS.
2. Press
to highlight Configure Device.
3. Press
to select Configure Device.
4. Press
to highlight I/O.
5. Press
to select I/O.
6. Press
to highlight EIO 1.
7. Press
to select EIO 1.
8. Press
to highlight DLC/LLC.
9. Press
to select DLC/LLC.
10. Press
to select ENABLE.
11. Press
to highlight OFF.
12. Press
to select OFF. The control panel displays a message that the setting has been
saved and displays an option to re-enable DLC/LLC.
13. Press M
ENU to return to the Ready state.
60 Chapter 3 I/O configuration ENWW