HP 3740 series

7.5 Labels
Guidelines
• Use only labels that are designed specifically for inkjet printers.
• Use only full sheets of labels.
• Verify that the labels are not sticky, wrinkled, or pulling away from the protective
backing.
• Do not exceed the paper tray capacity: Up to 15 sheets of labels (use only letter-
size or A4-size sheets).
Preparing to print
1. Slide the paper guide to the left.
2. Fan the edges of the label sheets to separate them, and then align the edges.
3. Place the label sheets with the label side facing down in the tray, and then push
the sheets into the printer until they stop.
The sheets will extend over the edge of the tray.
4. Slide the paper guide firmly against the edge of the sheets.
Printing
1. If necessary, open the Page Setup dialog box and set the paper size and
orientation options.
2. Open the Print dialog box.
3. Select the Paper Type/Quality panel, and then specify the following settings:
• Paper Type: The appropriate paper type
• Print Quality: Normal or Best
4. Select any other print settings that you want, and then click Print.
HP Deskjet 3740 series printer User's Guide
25