To Next PageTo Next Page
Need help?Do you have a question about the HP 4142B and is the answer not in the manual?
General| Brand | HP |
|---|---|
| Model | 4142B |
| Category | Power Supply |
| Language | English |
Covers instrument setup, power requirements, and environmental considerations.
Details methods and considerations for connecting test devices to the instrument.
Explains basic operation, safety precautions, commands, and measurement procedures.
Describes various measurement types like spot, sweep, and pulsed measurements.
Covers ranging, averaging, filtering, program memory, and external instrument control.
Details technical specifications and performance characteristics of the instrument and modules.
Instructions for physically installing the main unit and its components.
Essential safety information for proper grounding of the instrument.
Information on the High Power SMU and Medium Power SMU modules.
A summary of the ten different measurement modes supported.
Connection examples for HPSMU and MPSMU modules.
Connection examples for the HVU module, including status terminals.
Covers safety precautions before powering on the instrument.
Procedures for powering the instrument on and performing self-tests.
Details on sending commands and statements via the HP-IB interface.
Instructions for retrieving measurement data from the instrument.
Information on error codes, reading the error register, and resetting.
Basic operations for forcing voltage/current and performing measurements.
How to set and force a constant voltage output.
How to set and force a constant current output.
Detailed procedure for executing staircase sweep measurements.
Describes how to perform spot measurements.
Details staircase sweep measurement methods and waveforms.
Explains pulsed spot measurements using a single channel.
Covers pulsed sweep measurement operations and waveforms.
Describes combined staircase sweep and pulsed bias measurements.
Understanding voltage/current compliance and limit settings.
Procedures for performing self-calibration and self-test routines.
Detailed specifications for the SMU modules.
Detailed specifications for the High Voltage Source/Monitor Unit.
