HP 4155A - Page 32

Getting Started
If You Have a Problem
If display page does not appear after applying power
 If HP 41501 is installed, rst turn on the HP 41501, then turn on
HP 4155A/4156A .
 If the self-test fails, see \If You Have a Problem" in the HP 4155A/4156A
User's Task Guide .
If HP 16442A test xture is not stable
 Install stabilizers on the HP 16442A.
For this procedure, see \Installation" in the HP 4155A/4156A User's Task
Guide .
 If you use the HP 16442A test xture with HP 16440A selector or
HP 16441A R-BOX , attach HP 16442A to HP 16440A or HP 16441A by
using plates and screws.
For this procedure, see \Installation" in the HP 4155A/4156A User's Task
Guide .
25