HP 4278A - Page 85

CNT
SOFTKEY LABEL: COUNT ON/OFF (in 'COMPARATOR')
The CNT command sets BIN count to ON or OFF.
SYNTAX:
CNT
PARAMETER:
control
The control parameter choices are:
Control
Parameter
Description
0
1
Set BIN count to OFF,
Set BIN count to ON.
The default setting is ONTO.
EXAMPLE:
OUTPUT 717;"CNT1"! Set BIN count to ON.
COMP SOFTKEY LABEL: COMPTR ON/OFF (in 'COMPARATOR')
The COMP command makes the comparator valid or invalid.
SYNTAX:
C COMP
PARAMETER:
control
The control parameter choices are:
Control
Parameter
Description
0
1
Make the comparator invalid.
Make the comparator valid.
The default setting is COMM
EXAMPLE:
OUTPUT 717;"COMP11 Make the comparator valid.
4-20