HP 4284A - Page 258

OUTPut Subsystem
OUTPut Subsystem
The OUTPut subsystem command sets the DC bias monitor function.
Figure 8-4 shows the command tree of the OUTPut subsystem group.
Figure 8-4. OUTPut Subsystem Command Tree
:High POWer
The :High POWer command sets the high p ower mo de to ON or
OFF, which means that Option 001(Power Amplier/DC Bias) is
valid or invalid when Option 001 is installed. The :High POWer?
query returns the current high p ower mo de setting. Refer to
Appendix G.
Command Syntax
OUTPut:HPOWer
8
>
>
<
>
>
:
ON
OFF
1
0
9
>
>
=
>
>
;
Where,
1 (decimal 49) When the function is ON
0 (decimal 48) When the function is OFF
Example
OUTPUT 717;"OUTP:HPOW ON"
OUTPUT 717;"OUTP:HPOW 0"
Query Syntax
OUTPut:HPOWer?
Query Response
Returned format is :
<NR1><NL^END>
Example
10 OUTPUT 717;"OUTP:HPOW?"
20 ENTER 717:A
30 PRINT A
40 END
Command Reference 8-17