HP 4284A - Page 267

FUNCtion Subsystem
:IMPedance:RANGe
:AUTO
The :IMPedance:RANGe:AUTO command sets the auto range to ON or
OFF. The :IMPedance:RANGe:AUTO? query returns the current auto
range ON/OFF condition.
Command Syntax
FUNCtion:IMPedance:RANGe:AUTO
8
>
>
<
>
>
:
ON
OFF
1
0
9
>
>
=
>
>
;
Where,
1 (decimal 49) When the function is ON
0 (decimal 48) When the function is OFF
Example
OUTPUT 717;"FUNC:IMP:RANG:AUTO ON"
OUTPUT 717;"FUNC:IMP:RANG:AUTO 1"
Query Syntax
FUNCtion:IMPedance:RANGe:AUTO?
Query Response
Returned format is :
<NR1><NL^END>
Example
10 OUTPUT 717;"FUNC:IMP:RANG:AUTO?"
20 ENTER 717;A
30 PRINT A
40 END
8-26 Command Reference