HP 4284A - Page 278

LIST Subsystem
:MODE
The :MODE command sets the sweep mo de of the List Sweep
measurement function. The :MODE? query returns the currentmode
setting of the List Sweep measurement function.
Command Syntax
LIST:MODE

SEQuence
STEPped

Where,
SEQuence Sets to sequence mode
STEPped Sets to stepp ed mo de
Example
OUTPUT 717;"LIST:MODE SEQ"
Query Syntax
LIST:MODE?
Query Response
Returned format is :

SEQ
STEP

<NL^END>
Example
10 OUTPUT 717;"LIST:MODE?"
20 ENTER 717;A$
30 PRINT A$
40 END
Command Reference 8-37