HP 4284A - Page 283

TRIGger Subsystem
:DELay
The :DELay command sets the trigger delay time. The :DELay?
query returns the current delay time.
Command Syntax
TRIGger:DELay
8
<
:
< value >
MIN
MAX
9
=
;
Where,
< value > is the NR1, NR2, or NR3 format; 0 to 60 [s] in 1 ms
resolution
MIN Sets the minimum delayvalue (0 s)
MAX Sets the maximum delayvalue (60 s)
Example
OUTPUT 717;"TRIG:DEL 5S" ! Set delay time to 5 s
OUTPUT 717;"TRIG:DEL MIN" ! Set delay time to 0 s
Note
A sux multiplier and a sux unit, S (second), can be used with this
command.
Query Syntax
TRIGger:DELay?

MIN
MAX

Query Response
Returned Format is :
<NR3><NL^END>
Example
10 OUTPUT 717;"TRIG:DEL?"
20 ENTER 717;A
30 PRINT A
40 END
8-42 Command Reference